Printrbot Y Bar End w/ Nut Trap
by jr57k, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
An extended version for LC+ users that have deck and bridge issues. Three files are included a 10mm extended version, a 20mm extended version and a 13mm extended y-belt clip to keep things aligned.
This is a modification to the Printrbot's Y BarEnds (pb-Y-BarEnds-x4.skp). It has been tested on a printrbot and it works with a size 6-32 lock nut.
Purpose: This design might allow for a shorter bolt to be used and assembly with fewer tools.
Insert a 6-32 lock nut into the nut trap.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Printrbot Y Bar End w/ Nut Trap by jr57k is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jr57k a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jr57k would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).