This is an acrylic case for a Amiga 500. Specially made for the Capacitor Party, an Amiga party at Málaga City in Spain. This case allows to use an A500 motherboard (in my case, a1k A500 edition) which I don't have a special case for it, that's why I designed it.
This A500 have:
Vampire 500 v2
Internal speaker using an Pam amplifier.
Lan via SDNET
Gotek OLED and Gotek buttons and usb on the lateral.
If you want to use your a500 keyboard, you will need to redesign the front panel of the keyboard, since this panel is made for a AUKEY mechanical keyboard. Also a keyboard support at bottom will be required (designed), but depends of your keyboard angle.
This case must be cutted on a 3mm acrylic / methacrylate. Also a few 3x10mm screws with nuts required to assembly.
The company that I use to cut the case is TransparentCity, they are very cheap and the finish are high quality.
Note: This case is a preliminary design, the design works because I fully assembled it but maybe a few modifications is required if others devices are plugged into the A500.