If you switch to the Parloma Neck design from Drupp https://www.thingiverse.com/thing:2059967 remixed from https://www.thingiverse.com/thing:1597390 then you may want these additional parts and covers. TopPlateV2.stl takes the place of TopPlateV1.stl which I couldn't get to slice. TopPlateMount.stl replaces the MainGearV1.stl in the InMoov's head. The front_clavi_covers.stl are a remix from http://www.thingiverse.com/thing:1611620 by heisenberg333. They fill the gap, provide a mounting surface, and are a decorative cover. Fasten each with a 3mm x 10mm machine screw as shown. ShoulderCoverParloma.stl makes a nice finish covering from each shoulder to the neck, with a properly sized recess for the shoulder piston. I'm running the neck with EZBv4 with great range of motion in all directions! See the test video here: https://youtu.be/jS2gTYITwJM
More from Robotics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving mayaway a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.