This is an alternate Control Box for the Tevo Tornado to incorporate the MKS Gen 1.4 board with removable drivers. This also uses 2 Noctua 60mm fan replacements
**Update. All components can be printed on a stock 300x300 bed if you pint in the diagonal. You may have to stand them up vertically to print, but all parts do fit
This design requires the use of M3, M4, M5 screws and nuts. As well as M3 self tapping screws.
The Lid incorporates the SSR and is designed to use the following heatsink held in place by 2 M5 screws and nuts
The left and right panels use Noctua 60mm fans held in by 4 M3 self tapping screws
The power supply is bolted to the bottom by 2 M3 bolts.
The MKS gen 1.4 board is screwed into the right panel using 4 M3 self tapping screws.
The Display panel is attached to the cover with 4 M3 self tapping screws.
The 4 rubber feet are screwed into the bottom using M4 bolts.
The rest of the box is held together with M3 bolts and captured nuts