I just printed the final version in TPU and it's working great.
I'll upload a build video of the quad I'm using it for in a bit if people are interrested.
-Modified the bottom screws that hold the canopy, to house M3 6mm standoffs. (The Fit is very snug, but I would still glue the standoff in.)
-Rounded off some edges
-Re-sized the camera holes a bit
-Moved the HD camera strap holes closer to the "walls"
-Figure out some kind of camera angle locking system...
-add a simple spacer to lift the HD camera a bit so it can sit flush against the top
-Added camera lense protection
-Added holes for HD camera strap and VTX zip tie
-Rounded some corners and improved the print experience. No need for ANY supports. just print as is.
-Modified the FPV camera "mount" so that you can use normal short screws to attach the camera. The screw heads are hidden inside the canopy.
-Modify the bottom screws that hold the canopy, to house M3 6mm standoffs
I tried to make the canopy a bit easier to print and also changed the camera holder to fit a standard size HS1177 camera.
You can fit an AIO board, small Rx, VTX and Camera inside the pod. The ESCs need to go on (under) the arms.
-Add camera lense protection.
-Add holes for zip ties to hold the VTX.
-Add holes for a HD camera strap
Please feel free to join in on the development.
I'm trying to keep the design as easy to print as possible.