Loading
HVLD

GoPro Holder - Anycubic I3 Mega

by HVLD Dec 11, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Maybe the metal plate has been changed. My plate has 4mm. Therefore it does not fit.

How the heck does the support structure between the clamps can be removed, it is stuck like really really tight...

After two tries without support I now can confirm: This thing can not be printed without a support structure between the clamps with an Anycubic i3 Mega.

Also, I am an idiot for not thinking about this on beforehand...

Hi, thanks for your great work.
I've printed your holder now 4 times with PLA and I have the same problem every time. The opening of the holder that goes onto the Anycubic I3 Mega is way to narrow. All 4 prints broke when I gently pushed them into place. I would say if the opening was 1.2mm wider in the back it would fit. But now I seem to break all holders. The base is 4mm thick and my printed holder has only 2.85mm in the back. Would it be possible to have it altered?

Thanks in advance!
PS: I just saw that in the MADE Section you can see that the blue one has the same problem that he can only push it a fourth onto the plate.

Hi is it possible to make it longer? I'm using pi camera v2 and its too close to the head when bed is printing upfront.
Thank you

Will this work on the CR-10 Mini?

I want to print this but I'm worried it will put strain on those undercarriage motors have you noticed any issues?

Hi, no issues noticed during the print of this model.
It works very well with my GoPro Hero+, timelapse every 10 sec or 30 sec and the gopro official app for the montage.

Enjoy