Minimal Metric Washers (for M3 and M4 hardware)
by makefast, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Here are a couple handy washers for M3 and M4 bolts/hardware.
These have a nice snug fit and are very narrow to work in small places where you just need a little shim to keep things from rubbing.
We recommend printing a couple to make sure your printer is dialed in, then printing 20+ at a time and stocking your hardware bins so they're around when you need them (for example, when building the TuneFast Harp).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Minimal Metric Washers (for M3 and M4 hardware) by makefast is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving makefast a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure makefast would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).