The pieces are for mounting the AS5145B rotary encoder module.
Included is a file for mounting to a Sonic Shifter, one for general mounting, and a megnet holder for the ends of 1/2 inch shafts.
These pieces have been designed by Team 3061 Huskie Robotics
Make sure to use support material.
The boardHolderv3 is for general mounting onto a piece of C-Channel or similar. Use 4 sets of 4-40 locknuts/bolts with the locknuts in the pockets to mount the rotary encoder.
The Sonic Shifter connector should be mounted before mounting the motors/shifter assembly. Use 4-40 bolts for attaching board.
Press fit 6mm magnets into the magnet holder. It is designed to fit onto 1/2 inch hex shafts.