MKS Gen Stepper 60mm Fan Shroud
by pyr0ball, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This fan shroud is designed around the MKS Gen 1.4 board, and is designed to cool the stepper drivers using a 60mm fan. The shroud is mounted on the board by using a 20mm hex standoff (shown in yellow in the pics). Its designed to minimize the need for re-routing cables and should be easy to install/remove.
Supports are required when printing in either orientation. I recommend a wide nozzle and extrusion width due to the shallow pitch of the slopes on the shroud, and 3-4 perimeters.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
MKS Gen Stepper 60mm Fan Shroud by pyr0ball is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pyr0ball a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pyr0ball would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).