Loading
RGN01

Zesty Nimble Smart Effector mount

by RGN01 Dec 16, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I found that by very slightly making the PTFE tube hole larger and removing 1 mm form the length of the PTFE tube that your design has no impact on the Z probe sensitivity, I have been using this design for some time now with good results

I was about to suggest the same thing, the ptfe tube just needs to move freely and only needs to be able to move up 0.05mm, it won't reduce any constraint on the filament as the tube is really short and the gaps are really small. Going to print this off and give it a try