E3d v6 Fan duct
by skorpia, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I saw yesterday the bracket mount that VA3TNE (https://www.thingiverse.com/VA3TNE) uploaded here https://www.thingiverse.com/thing:2350699, and i was tempted on make a 30mm fan duct version adapted to the mount.
And .... 9 hours later after several drawings and dessigns here it is!!!
Use either ABS or PETG, with 3 perimeters and speed up printer traveling speed during retractions to have the lesser oozing as possible.
im making wonders with petg and:
150 mm/s travel speed,
45 mm/s print and infill speed ,
5 mm retraction distance,
50 mm/ retraction speed
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
E3d v6 Fan duct by skorpia is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving skorpia a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure skorpia would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).