UPDATE APRIL 7 2018: I have replaced the hollowed parts with solid parts. If you've had trouble printing the hollow versions, this should help. Please let me know if you have any trouble printing the pieces.
This is a model of a frost dragon taken from the game Skyrim. It is not my original creation.
The original model was altered to shorten the rock it stands on, close the holes, and create thicker wings. At full size assembled, it is approximately 37 cm wide x 32 cm high x 40 cm deep. The parts at full scale fit on an Original Prusa MK2S.
I have included the dragon all in one piece (frost dragon.stl) in case you want to scale it down and not bother with assembling pieces.
You may wish to add more weight to the bottom of the statue, as the statue's center of gravity is shifted to the front and may tip on unstable surfaces.
Sorry there's no pictures of the parts by themselves, I was assembling and painting as I went along.
Print times with settings as above:
pillar base (not hollow): 14 h 19 m
pillar top: 8 h 51 m
body bottom: 8 h 52 m
body top: 18 h 25 m
left wing: 18 h 5 m
right wing: 17 h 11 m
head: 7 h 20 m