Felix Pro 1 cold-end fan housing
by venkel, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
On the Felix Pro 1 the Z-sensor mechanism is quite fragile. With the original fan duct, there is some contact between parts that causes friction, which many times prevents automatic bed leveling from completing.
This part aims to solve the friction problem, by building less wide.
Simple 1,5h print and 15 minutes of installation.
M4x16mm screw (2 pieces)
M4 self locking nut (2 pieces)
3x15mm screw for in plastic (2 pieces)
Felix Pro 1
Needs to withstand some heat, so use PETG or better.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Felix Pro 1 cold-end fan housing by venkel is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving venkel a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure venkel would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).