Loading
Kookaburra88

E3D Volcano / v6 40mm axial fang for CR-10 / Ender-4

by Kookaburra88 Dec 19, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

does that work with Ender 2?

If the heavy duty mount fits to the ender-2, the answer is probably yes.

https://www.thingiverse.com/thing:2494642/files

CR-10 Heavy Duty customisable modular e3D V6 mount Volcano 5015 ABL
by chito

Unfortunately I do not know it
maybe you have a picture of the Ender 4 sled? if the same as Ender 2 then that fits

You can answer it yourself, if you look in the makes of the heavy duty mod ;)

how do I mount this to the CR-10?

You need to mount it to the "CR-10 heavy duty mod mount"

https://www.thingiverse.com/thing:2494642/files

CR-10 Heavy Duty customisable modular e3D V6 mount Volcano 5015 ABL
by chito

can you make this with abl sensor mount on the right side ?

Unfortunately for you, I do not use ABL. But if your want it, just download a corresponding ABL holder and mesh the two stl files together. Then please upload to thingiverse and give credit

Comments deleted.

Printed this out and found it worthwhile with some exception. The flute (I will call it) that snap fits to the E3D hot end does not have enough sealing around the bottom of the E3D cooling fins and when the fan is on there is a good amount of air flowing through the base of the mount and down over the hot end.. Seems there should be more of a flaring like at the top to cover around the base.