MPSM V2 Extruder (Outdated See Decription)

by wileykyoto Dec 20, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Does this print work for this extruder on my V2?

No. It only works with the newer v2 models (nov 2017-present) that have a newly designed extruder.

Could you please point me in the right direction of which one I need for my machine? Thanks!

MPSM Extruder Baseplate v1
MPSM Extruder Arm v1

Which bearing you are using to cause pressure on the filament. Size x Thickness? Which Bearing Specification?

MPSM V2 Improved Extruder (WK9)

I'm using the stock bearing from the MPSM V2 Extruder. It's 4x11x4 mm.

Can I cut the stock bowden tube or do I have to buy one?

Depends, if there's enough to spare from what comes on the machine, then you could probably just cut a little piece off of that. You really don't need much, and the pc4-m6 fitting actually sticks a little farther out than the original fitting, freeing up a little slack. Just make sure the bowden tube is still long enough to reach the far right of the build plate, with the hotend all the way down, without bending at a weird angle.