This is a half shell Christmas Tree Bauble.
This is ideal for beginners - i.e. for testing their new 3D printer they got on christmas (Just be sure you know which parameters you set on Cura).
For those I also attached g_code for those Baubles, which should fit for a lot of small sized printers. These a pretty standard settings for any 1.75mm printer.
This is specially designed for fast printing as it could be printed in vase mode (Cura Spiralize Outer Contour).
I designed the ball with the text 2017 inside. This would fit great on this years christmas tree.
There is also a small plug which you could break away and attach some sort of string to it.
Hope you enjoy and feel free to remix, use or do other stuff with it :)
Print in Vase Mode (Spiralize Outer Contour) so that the walls are only 0.1mm.
I usually print with a Skirt so that the hotend extrudes enough material when starting with the object. If you have trouble with adhesion, then try something like a brim. This would not affect the quality :)
After printing the balls look best if you color them.
I did a golden acrylic paint on the inside and christmas tree matching colors on the outside.
Both are a bit of metallic and shiny.