Some time ago, I posted the beginnings of a Warhound Titan design. This is the finished version of that design. It was modeled based on patterns that can be found here:
The credit for the original design goes to whoever made the original patterns. I added the snap together parts and gave the weapons a little more detail, as well as a few other changes.
*Added .rsdoc's for anyone that wants to edit original files.
F.Y.I., I'm not using the play, I'm using an old Printrbot Plus V2. Brim layer recommended for most of the larger parts.
To make this, you will need to print:
- Toe Joint 1 & 2: x8 of each
- Foot: x2
- Ankle Base & Joint: x2 of each
- x2 of each Leg and Leg Joint (x4 of Leg Joint 1)
- x4 of Leg Pistons
- x6 of Front Leg Pistons
- x2 of Back Leg Piston
- x8 of Joint Cap 1, x4 of Joint Cap 2
- x2 of Hip
- (for Vulcan Megabolter) x2 of the Ammo Hopper
- x1 of everything else
Although most of the parts are made to snap together, this is not a substitute for super glue. When assembling the main hull onto the waist, do not glue the part of the waist joint that is made to connect to the hull. This is so that the model can pivot around its waist, as well as storage purposes. Also, do not glue any of the weapons to the mounts. They are made to pivot, and be interchangeable.