Multicolor Porg. The printed porg is at 75%. If you print at 100% the orange brow will connect. You need multicolor capabilities such as the Original Prusa Mk2 MMU or Mosaic Palette.
My first try making a color file with MeshMixer
Big shout out to the original designer - @stevenquinn
Position the waste block behind or in front. If you put the waste block on the side you will have a hard time keeping the wing standing. If possible give the supports better bed adhesion. Turn on detect thin walls for the best chance with the brow.
If you are able to pause and switch colors, change line once the feet print to get a better brow color. I couldn't figure out how to change lines mid print.
The attached gcode is what I used. The problem is the waste block placement. Its linear advance, 10% infill, and 75% reduction.
No paint skills necessary