NOTICE: It has come to my attention that the part is waaaay too small (1000x too small) if you are going to print this I suggest (unless your printer can print at .5 micron) to bump up the scale of this model in your slicer at least 1000% I have come to realize also that I modeled it too small so I suggest adding 200% more to the model. (Although my test print I scaled it to only 1000% you should try 1200%)
UPDATE: I added the bottom circle cutaway and the one on the lower side of the print to make it just like the formlabs one.
I made this by eyeballing the sample that form labs sends you of their form 2 printer. Thought it would be a fun and challenging thing try and model. This is available to print if you would like to test your printer.
Remixes are welcome try and model this yourself after printing it and upload it as a remix to compare. :-)
CREDIT: The original model is based off of the FormLabs Form 2 sample print so that credit goes to them and I also made sure to watermark the top where they had their watermark stating that "Designed By FormLabs Re-Created and Printed By Diego Jimenez"
Retraction set to 0.6mm
Print speed set to 60mm/s
I designed this by eyeballing the formlabs sample print and recreated it on AutoDesk Inventor for fun and a challenge
Slicer Software (i.e, MakerBot Print, Simply 3D, etc.)