Replacement Clip for Volantex Ranger 2000 wing attachment. This may be usable for other models as well, I am not sure if it is unique to the Ranger 2000. Fits same as the stock clip and works great holding the wings in place with great strength. Best printed in ABS from my own experience. I have included the support needed to print this in the orientation that it is shown in the picture. Easily snap it off after printing and sand as needed. If you want to print it in a different orientation that is up to you, this is what I found to work best for strength and print-ability.
Easy to print, only thing is that it is a small footprint so if you are having trouble getting it to stick, the use of rafts is optional. Also, because it is so small, I would recommend printing no more than 0.2 for layer height. 100% fill for strength. ABS preferably, PLA or PETG is also acceptable.
Remove the pre included support, should just snap off easily. Test for fit, sand or file to get the tightest fit possible in to the tray. Use stock screws to secure.
Cloned from original with measurements pulled using digital calipers.