A simple Y axis mount to reinforce the stepper motor with adjustable Screw.
MOVE THE Z LIMIT SWITCH FORWARD TO AVOID HITTING THE BED WITH THE NEW BRACKET
You will need.
2 m3 screws length 42.5mm each
2 m3 screws length 7mm each
1 m5 screw length 12mm
1 half T nut M5
It works just perfect.
attached are Gcode and stl files.
Inland PLA 1.75mm
REMEMBER USE AT LEAST 90% INFILL
if you want to print it right away just upload the gcode file to the sdcard and its done.