Ukiyo130 : canopy
by nracing, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Canopy for Ukiyo130 by NRACING FPV (www.nracing-fpv.com).
Designed for the runcam micro swift, linear antenna and rx antenna on the side by using antenna tubes.
The camera may touch a bit the 20x20 stack on the first version of the frame (before october 2017).
On the new version of the frme the stack is a bit backward.
The canopy can be print horizontally but as you need support, half of the filament will be waste.
You can print it vertically, it will be twice faster and almost no support. However the front of the canopy wont be really clean, and you really need good print settings to make it possible (nice challeng, isn't it ? :D ).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Ukiyo130 : canopy by nracing is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving nracing a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure nracing would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).