An open electronics box for the Anet A8 printer. This will bolt to the same guide holes as the mainboard. It will house the mainboard and dual mosfets. It is offset as to not interfere with the X-axis motor.
There is a small cage either side of the mainboard for cable management
This just fits in the bounds as a one-piece print for the A8.
I have made some alterations to the STL since I printed it to reflect the manual alteration I had to make.
I have now added the STL for the Lid that will accommodate a 120mm Fan
I have added an STL for a 120mm - 80mm fan mount for those who already have an 80mm fan as well as STLs for a 120mm and 80mm fan cover
I have updated the Box STL file as there was a group of faces missing from the model preventing the gap behind the mainboard from printing.
Also fixed an issue with the lids mounting holes
This will now print as desired (Thanks to Atatoth for helping with this resolution)
**Minor fixes to the STL files
Printed with Cura 3.1.0
I printed this vertical using supports (alot of extra material) as I couldn't get a good base layer with all the airholes in the top of the lid