Locking Cube Coat Hook
by cjhelmkamp, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I needed a better way to hang my winter coat and the one provided in my office sucked, and the locking coat hook was made. It is made to lock on top of the curved metal top piece that makes up the top of the cube wall and will lock into place by gripping the edge of the metal. It is also helped by the soft walls of the cube.
The lower hook will need some support and so far the 20% infill seems adequate.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Locking Cube Coat Hook by cjhelmkamp is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cjhelmkamp a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cjhelmkamp would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).