Camera Mount designed for vibration dampening, VTX/LED strip holder, and 30.5x30.5mm to 20x20mm flight controller mount for the BeeRotor 180 Frame.
Read my full build guide here: https://nathan.vertile.com/blog/2017/12/27/omnibus-nox-flight-controller-180mm-build/
The camera mount should work with any board cam with 2 small holes in the front on either side of the lens, for example: http://bit.ly/2zMLGkp
Any small, flat VTX will work, such as: http://bit.ly/2liGoJ6
Any 10-led RGB led strip should work, such as: http://bit.ly/2CqIoq0
Any flight controller will work, but the offset flight controller mount is designed to leave enough space for the NOX flight controller.
2x 2mm (3-5mm length) screws to attach the Camera to the mount
2x 2mm (3-5mm length) screws to attach the LED strip to the mount
8x 3mm (3-5mm length, depending on frame and flight controller thickness) screws to mount the flight controller
I added supports with Mesh Mixer and printed it vertically in PETG with .2mm layer height and 4 walls