Keep that special someone on a leach… or use them as kinky accessories to your outfit.
The 2 parts lock together with M3x30 socket head screws and nut.
Although very durable when printed in PLA, they are breakable in case of emergency. Have fun, but keep is safe!
There are 3 versions:
One version is solid.
Two are designed to hold decorative M4x6 socket screws in a tapped M4 hole. One has printed through holes and one has inside holes. The last one prints nicer since the outside perimeter is printed in one part. The holes have to be drilled afterwards with a 3.2mm drill and tapped M4.
The 2 parts can be printed in one piece without support and seperated after printing. A gentle wiggle and pull on the hinges wil seperate the parts.