This is the collection of remixed and aggregated items for a pro upgrade kit for the CR-10.
This should help you resolve and improve most issues with maintaining a clean setup for the CR-10.
See Pictures for final result of upgrade
Additionally, I've attached one full platter with all upgrades per section, or you can pick and choose the pieces you want. See the breakdown below of the hows and whys.
Print one of each except for CamMount-ArmPart & CamMount-M3Wingnut
Print as many of CamMount-ArmPart as needed (this is the arm you can join together using M3 30mm screws and M3 Wingnuts)
Print as many of CCamMount-M3Wingnut as needed
You will need either Zip ties or 10mm lenght wood screws to attach base to plastic fillers on CR-10 rails.
Bed Mod Parts:
Print 4x Bed_Level Dials
Use Bed_Wire_Restrain_bracket and cover to manage bed cables
Bowden-Cover + small 50mm piece of PFTE tubing for best effect
Bowden-Dial x 1 to visualize bowden motor movement.
Print 1 of Extruder_support_Wires_ASide
Print 1 of Extruder_support_Wires_BSide
Use Zip ties and enclose both extruder wires and bowden tubing for secure cable management.
Extruder_Fang_OEM_Mod - Print one of these and use all the original parts of your CR-10 kit.
Add Fan Guard for protection of extruder cooler - you will need 2x or 4x 20mm M3 screws for this part.
Spool Holder Upgrade kit
Print this as a solid tangle free upgrade for stock CR-10 spool mount
Print 1 Nut, and 1 NutCut to attach spool holder to stock spool base.
Print with the following settings with PLA in CURA 3.1.0
(Some of these settings are hidden so click the cog to enable them)
Print Speed: 60
Top/Bottom Speed: 30
Travel Speed: 120
Initial Layer Speed: 10
Skirt/Brim Speed: 10
Print Accel: 500
Travel Accel: 5000
Print Jerk: 20
Travel Jerk: 30
Generate Supports: Yes
Support placement: Touching Build Plate
Support Overhang Angle: 50
Support Pattern: Zig Zag
Support Density: 8%
Support Line Distance: 5.0
Support Z Distance: 0.1
Support Top Distance: 0.1
Build Plate Adhesion: Brim
Brim Width: 8.0
Brim Only on Outside: Yes
Print Sequence: All at once