Amiga 500 Gotek USB bracket v2 - FlashFloppy OLED
It's a bracket for the well known Amiga Gotek drives which now supports OLED displays when using the FlashFloppy firmware.
More info: https://github.com/keirf/FlashFloppy
There is no need to cut the Amiga computer case, and the buttons and USB port can be accessed and used easily.
Also the disk drive button port will be covered so no hole is being left.
The support cylinders are not really needed because the whole Gotek structure is not that heavy. The are two versions included on with a pin which can be pointed downwards and the other side can be glued/screwed to the base structure.
The other cylinder has a screwhole on both sides.
You can also choose which kind of Gotek display case you want to use, a simple box or a more advanced case (with or without Amiga logo).
More info on how to connect the OLED display to the Gotek drive can be found here: https://github.com/keirf/FlashFloppy/wiki/Hardware-Mods
Note: I'm still experimenting with the OLED cases so things might change in the near future
Previous version: https://www.thingiverse.com/thing:2098110
Normal - 0.1mm layer height
Only support is needed when printing the diskdrive button.