This is a stand for an original DMG style gameboy that many have been using to create raspberry pi emulators, the 'Gameboy Zero'. While I made this particular .stl, it is based off a picture of another stand a saw by a great modder named wermy. That stand is currently being sold here, go check it out!
I have included two versions of the stand: one with the pi logo and embedded 'Gameboy Pi' at the base, and one blank version. I've also included files for the logo, letters, and cosmetic ventilation grate in case you want to print them out and place them inside the embedded areas as I have. You will need a 0.25mm nozzle or less to do this, not the 0.4mm that is most commonly used.
0.2mm for stand, 0.1mm for embedded pieces
You will likely need to sand the embedded pieces to get them to fit inside the recesses in the stand. I used a combination of sanding, superglue and hammer to get them all in.