JGAurora A5, A3S X motor Cable holder
by Andrewgrima21, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This my 3rd design of this it work great. It connects simply onto the x motor not affecting any of your prints. Unfortunately they way it clamps onto the x motor means that you will loss 8mm of your total hight meaning you can only print to a maximum hight of 312mm. The cable slides into the little support that I made so it will no long get stuck with the bed cable. Any problems let me know and I will fix them or improvements you may have.
- This will remove 8mm from your maximum z height
- This design can be used for A5 and A3S
the first 2 or so layers print at half speed but should be all good.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
JGAurora A5, A3S X motor Cable holder by Andrewgrima21 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Andrewgrima21 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Andrewgrima21 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).