I designed this phone dock to be clipped onto the bottom of a cars center console, making it possible to quickly connect my phone to my car with one hand. If you have Apple Car Play or Android Auto this is ideal as you don't need to interact with your phone once it is connected to the car.
The intention was to create a mounting point without having to drill into the center console or dashboard of the car, however stick on velco may be required on the back in order to create firm grip to cars carpet if the dock is slipping down.
The hole for the cable is centrally located at the base. In my case the cable is thick enough to be wedged in between the clip part (see photo), this prevents the cable from moving when connecting and disconnecting phone.
Internal dimensions for phone = 80mm (wide) x 15mm (thick)
Cable opening = 13mm x 7mm
Space between main body and rear arm = 6mm
Print on its side as shown in photo.
Use thick brim in print settings to help the thin arm stick to the bed.
Use stick on velcro on the back in order to create firm grip to cars carpet if the dock is slipping down.