This is an electronics box/enclosure witch also has a touch screen for octoprint.
Designed for Anet A8 But should be able to suit most printers.
If you make one I would really like to see it.
ATX PSU Remix:
No Touch Screen Remix:
RepRap Full Graphic Smart Controller Remix:
Camera mount I use:
also made another axis for that mount for the mount:
Adde Atroprint Back lid.
Added "f3d" & "iges" files for those of you who wish to modify for them selves.
If you add support for other boards, screens or anything else and want to share it let me know and i can add to this thing for everyone.
Added a lid that supports the Anet A6 12864 LCD.
This is currently unverified as I do not have this screen to test it. Will update once someone has printed it.
(This does not have outline feature)
Electronic Mounting Points for:
- Anet A8 main board.
- Anet A8 Original Screen and controls.
- 2 MOSFET's.
- Upgraded 30 amp Power Supply AND the original Anet A8 PSU (Original only uses 1 screw on top but can drill holes if want more secure mounting).
- 2 Slots for SD cards for Anet and Raspberry via microSD to SD extensions. I use SD cards because they are just easier to handle.
- Light switch.
- 80mm Cooling fan.
- 7" Touch Screen.
Parts used in my build:
Not that much to it really.
Infill and layer height are all up to the person printing.
All parts are laid out the way I printed them, feel free to position how you want.
All parts are able to fit on a 220x220 build plate.
Print out main body parts, glue or plastic weld together or how ever you want to join them.
The Lid and Front Panel parts get screwed on.
If it's to confusing you don't have to do it just ignore all the FIRST LAYER ONLY files.
To get the outline of the Octoprint logo and edges in a different color print the part with the "First Layer Only" first don't remove from build plate then print the whole piece on top of it.
Same go's with the Anet logo.
Raspberry mounts on the under side of the back lid.
Octoprint with Touch UI set up:
I followed this guide to get all working: