MPSM side panel 2 piece remix. I wanted to print flat using the MPSM (2 pieces required), add the bed rewire, gantry support (6mm rod with linear bearings), a small vent, and extra rigidity. I haven't been a fan of how 'wobbly' the existing side panels are - especially 2 pieces with gantry support. The main reason is that there isnt a bolt in the bottom-mid region, so breaking into pieces leaves an unsupported area in the middle. The bolted flange should make this behave like it is 1 piece, for all practical purposes.The webbing overlay feature also adds some extra rigidity (also adds some flair). Add a dab of super glue to hold the nuts on the right side of the flange to make it easy. Standard M3s are good. You'll need 2 linear bearings, a 6mm steel rod, and to 3D print the piece that zip-ties the bearings onto the cantilever arm that holds the extruder. I got the bearings and rod on Amazon.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.