Capo for Ukulele
by PaladinDG, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a remix from the Cap Ukulele by Narya. Would have made that one, but the files are corrupted here on thingiverse, so had create my own version. This gave me the opportunity to improve the design by adding an extension to open the capo.
JG Aurora A5
Only part 1 needs support
After printing take an old mouse pad or get a cheap one, but make sure it is the 2mm thick type. Cut the pad to size and hot glue to capo.
Will also need the following:
1 - M3 x 20 screw
2 - M3 x 10 screws
1 - M3 lock nut
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Capo for Ukulele by PaladinDG is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PaladinDG a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PaladinDG would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).