Loading
juergen54

Easy print & glue - Panzer V Panther Ausf.G

by juergen54 Jan 7, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you very much for an excellent model! Great work!

Konrad,
at the moment I don't plan to publish the Tiger I as a sliced model including pictures and assembly instructions.
May be later, because it takes a lot of time.

The slicing itself takes only some minutes.
I sliced m_bergman's Tiger I of his 1-100 Tanks collection.
Attached you will find the files.
You can glue the parts together in the same way like the Panther.

Thanks to m_bergman for his great designs.

The prints come out SO MUCH BETTER the way you sliced it. Thank you !

Are you planning to do the same for the Tiger 1 ?

Hmmm. I scaled it to HO 1/87 so 115% of the original files and it seems too big.

I guess we will see when the print ends. Definitely a Panther should not be bigger than a Tiger 1...

If you have a look at the original specifications of both tanks, you will see that only the width of the Tiger is bigger.
The Panther is a really big medium tank.

Tiger I

Length (hull) 6,32 m
Length (over all, gun forward) 8,45 m
Width 3,56 m
Heigth 3,00 m

Panther Ausf G

Length (hull) 6,87 m
Length (over all, gun forward) 8,66 m
Width (with skirts) 3,42 m
Heigth 2,99 m

Thank you. Printing now, very slowly, with a 0.2mm nozzle and 0.16mm layer height. Quality looks very good for the right side track that I printed so far (4 hrs)...

Hi Jürgen, just in case anyone is asking: the .stl is 1:100.
Printing at the moment, thanks for your work.

Hi Ole,
every STL-file starts with 1-100...
That is the scale.
Before printing I always rescale the STL-files to 1/72 because my model collection has this scale.
Regards and have fun.
Jürgen