Meet Oscard, the only credit card action figure! Stands 3.5"/9cm tall.
Simply print, cut from the frame and trim the sprues, then clip together.
The space on his or her chest can carry text or a logo if required.
Use the photo above to determine which parts are which.
Beware - contains small parts - keep away from young children!
UPDATE: I've uploaded a frameless Oscard for quicker prints using less material.
Further UPDATE: Now the parts are downloadable individually! You can print as many, or as few as you like, at any size.
For 1 complete action figure, you will need:
1 x Head
1 x Body
1 x Neck
2 x Hips
2 x Upper Leg
2 x Lower Leg
2 x Ankle
2 x Foot
2 x Hand
4 x Arm
If you are thinking of printing a larger scale version, you will have to file or Dremmel down the studs on the parts with clips by at least 50% otherwise it’s almost impossible to snap the parts together due to the increased stiffness of the material.
Print with no brim or raft for best results. Only tested with PLA and PLA+.
Takes approximately 1 hour to print.
Trim the sprues with a craft knife or sharp scissors.
Designed in Sketchup.
Oscard is a FDM printer-friendly version of the existing original model on my Shapeways shop.
I challenged myself to come up with the most interesting thing that could be made inside the profile of a credit card. This was on the back of a friends creation, the credit card drinking game by 3DPrintNovesia and inspired by credit card chess by Innovo.
Seeing as I love action figures, why not an action figure in a credit card? And so Oscard was born!