This is an enclosure for a DIY remote I made for the Helix DSP.2 audio processor using information from DIY Mobile Audio. The total cost was around $30.
- Mini DIN 8P male connector (MD-80)
- Cat6 Cable
- RJ45 Breakout Board
- 2x 10k Linear Pots (PTD901-1015K-B103)
- 2x Black Metal Knob (COM-10002)
- SPDT Push Switch (PN12SHNA03QE)
- Cap for switch (G003A)
- Prototyping board
I would recommend not using hot glue given the high temperatures in the car. Also, the PLA warped a bit.