Homematic Table / Desk Stand Tischaufsteller
by conny_g, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Table / desk / shelf stand for Homematic & Homematic IP thermostats.
The first print (photos) even printed great as is, without leaning it and without supports.
Currently trying printing it 15 degrees leaning backwards with supports only from build plate to make the upper overhang even easier. See photos.
For best quality print with 3 perimeters, 1mm top/bottom, seam on the backside right or left, 0.1mm layers, <= 40mm/s speed, <= 25mm/s for outer walls and top/bottom, 25% infill.
In this quality it prints in 17 hours and needs 70g of material.
Print the 2 clamps separately and glue them in with superglue or plastics glue.
Make sure they are oriented correctly, the "fin" should point outwards (see zoom photo).
Outside of that and the usual fine-tunings with sandpaper (3 minutes), no post processing required.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Homematic Table / Desk Stand Tischaufsteller by conny_g is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving conny_g a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure conny_g would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).