by ClaireHax, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This was put together as a test print to try and work out the a few finer details of my printer. You will need to use a brim and supports. The 2 objects will need to be placed in the same X/Y location but with the ball approx 10mm raised on the Z axis.
I have included the gcode I used for the Anet A8 with PLA.
Bed temperature of 55C works good for this with PLA but you will want some cooling.
I did this print with a
Print speed of 40mm/s
Outer Perimeter Speed 30mm/s
Infiill Speed of 60mm/s
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Captured Ball by ClaireHax is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ClaireHax a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ClaireHax would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).