A zombrex autoinjector prop, based on the game series Dead Rising. Some stylistic guidance from the old style epipen autoinjectors with 'blue to the sky, orange to the thigh' instructions.
Built using 3/4" SCH40 PVC pipe, and some M3 screws and locknuts. You may need to adjust the lower retainer size to friction fit into SCH40 PVC pipe dependent upon the tolerances of your pipe.
The upper cap is a single piece print which is glued into the pipe. The lower requires assembly and M3 screw assembly, though there's no specific reason why it couldn't be re-designed for single piece printing. Once built it was no longer a priority, so this is as far as it will go.
The label was printed on a Dymo labelwriter label, and has been provided in the format for their software.
If you are making one of these, consider sending a tip - every dollar helps to create more things like this and encourage more open sourcing of designs.