This is KIBO (Japanese : Hope), a 3D Printed Prosthetic Hand with actuators.
It is meant for below-elbow amputation.
Everything better be printed in ABS or stronger for real use, and PLA is okay for education and demonstration.
NOTE : this project only include the hand itself and not yet the required electronics assembly, hence you will need to make them yourself (e.g. Arduino)
You will require :
- 6x M5x15 screws
- 1x M3x10 screw
- 1x M3x15 screw
- 2x 605zz bearings
- 1x 5mm shaft , 70mm length
- 1x 5mm shaft , 60mm length
- 1x 5mm shaft , 50mm length
- 2x MG996 Servo
Instructions for assembly will be coming soon in video format. Stay tuned!
I designed this for a friend in need, who wanted a hand prosthetic that looks awesome. This project was sized for him, and thus no other sizing is available.
You can contact me directly if you need other sizes or design.