··=[ SDX's CR-10S Y-Tension-Tool ]=··
SDX's little helper ;-P
What parts do I need?
- 1x Y-Tension-Tool_01
- 1x Y-Tension-Tool_02
- 1x Y-Tension-Tool_03
- Maybe anyone for fixing the screws... but works alone, too!
And how does it work? ...
- Print the Parts. 0,2mm draft quality is enough. Maybe a little more infill (30%). Align them on the bed like shown on the picture.
- Insert Part 1-3 into the Y-thingy like shown on the photos.
- Loosen all 4 screws.
- Press Part 2 between 1 and 3 soothes will tension the Y-axis.
- Fix the 4 screws.
- Remove the 3 Tool parts.