Temperature Tower With Shapes

by mikeneron Jan 18, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

For everyone wanting to print this tower with 0.15 Layer height. (8 top & 8 bottom layers)
The layer-steps are the following: 52 - 97 - 141 - 185 - 230 - 275 - 320.

Can you create a model for 190-255? I need hotter "PLA plus" without hitting the 260deg limit. If not I'll just print both the PLA and PETG and just skip the 260 setting.

[edit] never mind, I'm going to use this one: https://www.thingiverse.com/thing:2615842/

Customizable Temperature Tower Version 2
by quirxi

is it every z height 10mm to change temperature of the print or do i have to allow for the what looks like 2 mm base?
so 10, 20, 30?
or 12, 22, 32? I am pretty sure its this one on inspection of the model but just making sure

The base is indeed 2 mm, so what you are thinking would be correct...12mm, 22mm, 32mm, etc.

Your description says 22mm for the first change to 215C, shouldn't it be at 12mm or layer 11?

You are correct. I updated the instructions to read change to 215C at 12mm and then change to 210C at 22mm.