Battery compartment for 4x 18650 batteries and its protection and charge control circuit.
by J_RPM, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Change the Nickel-Cadmium batteries for other Lithium Ions, in an electric drill. The original battery pack is composed of 12 elements of Ni-Cd (1.2V), providing the set with a nominal voltage of 14.4V. When using Li-ion batteries (3.7V), it is only necessary to install 4 modules. 4 batteries of type 18650 are used, with a capacity of 9800 mAh (depending on the manufacturer). Although the real capacity of these batteries is much lower, these batteries are perfectly valid for powering an electric screwdriver. The protection and charging module YH11047A is installed inside the battery pack.
The batteries can be soldered with cables inside the support, or place springs as in a normal battery holder.
How I Designed This
Information in spanish
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Battery compartment for 4x 18650 batteries and its protection and charge control circuit. by J_RPM is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving J_RPM a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure J_RPM would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).