Loading
TsunamiSoul

Marlin Firmware 1.1.8 Anycubic Kossel Plus - G33 "auto_calibrate" Updated

by TsunamiSoul Jan 21, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Have you tried Marlin 1.1.9? I wonder if this works better?
Salu

hi, i have a anycubic delta plus linear adn some problem with bltouch for bed levelling with marlin 1.1.8 (bltouch not a problem... the levelling is difficlut to achive).
I see you details but i do not understand why you make :
G33 P1
(wait the auto calibrate)
G33 P2
(wait the auto calibrate)
G33 P5
(wait the auto calibrate)
G33 P10
(wait the auto calibrate)

but P10 is not like p1 or p2 or p5 with more point ?

and after M500 when i reset printer, i need to modify mi slcer statup script in somw way to use G33 data ? or printer automatically get the data at startup ?

thanks
marco

When you save the data, is stored in the printer, and it get the adjust automatically at startup. (in my printer work OK in that way). I not use other system.

Is more explained in this link.

https://github.com/FLSun3dp/FLSun-Kossel-Mini/wiki/07.-G33-Auto-Calibration
https://github.com/FLSun3dp/FLSun-Kossel-Mini/wiki/02.-Calibrate-your-printer

probing failed!!!!!!!!!!!!!

What is the problem, if is posible help you, I try.

Best regards

Modified the firmware with low movement speeds.

What are the changes from FLSun?

I use the firmware for Flsun and comparing files config and adv config i translate the adjust specific for Anycubic.

I only mix the 2 files.
For my Anycubic Kossel Plus work perfect.

I have the Anycubic Kossel Linear Plus. I have no idea what's going on, but it's like everything is inverted in terms of movement?

In the firmware i modify for my drivers Trinamic TMC2100, the direction in this drivers is inverted in the firmware, you only need edit the firmware to change for the correct direction:

In the firmware is "False" the adjustment in the direction, you only need change to "True" in the configuration.h file:

// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. !!! Modificado para TMC2100 !!!
define INVERT_X_DIR false
define INVERT_Y_DIR false
define INVERT_Z_DIR false

check always if the direction in the extruder if is correct.

define INVERT_E0_DIR false
define INVERT_E1_DIR false
define INVERT_E2_DIR false
define INVERT_E3_DIR false
define INVERT_E4_DIR false