20mm Scope mount (1 inch tubes)
by Panzergruppe, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Printed in PETG at 60% infill. .2 mm layer height. I would not recommend PLA.
I tried this mount on a H&K SL8 .223 succesfully.Hold zero pretty well,
6x M4x40mm with 7 mm nuts,
3x M6x40mm with 10mm nuts
Feel free to improve! It was a lot of fun testing it on the range.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
20mm Scope mount (1 inch tubes) by Panzergruppe is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Panzergruppe a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Panzergruppe would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).