This is a simple wall hook with and internal diameter of 50mm and two printed 2mm holes (each including 7mm recess).
I printed the hook on its side. I'll update the file once I figured out the correct settings in Fusion 360.
Filament: Anycubic PLA 1.75mm Black
It's recommended to drill the holes again with a 3mm drill bit.
I've got a few wooden poles which needed sturdy wall mounts being more beautiful than the plain nails on which they're resting at the moment.
The model has been created from two SVG files created in Illustrator. The first one was used to create the main body, which was then smoothed out. The second SVG contained all needed holes and recesses which have been extruded and subtracted from the main body.