Loading
Polytech

Knurly Thumb Hex Bit Driver

by Polytech Jan 24, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for this great idea and model. Additional information for others......I built this at 100% and the bit fits but will slide out. as shown in the photo, the bit has a small lip enabling you to push down on the knurl and twist. Works great as designed. if you are using a Phillips, slotted, torx, etc bit without a lip, they will slide right through. i built another at 95% and it was still too large for those small bits. 90% was too tight, it actual split the part trying to hammer it in for a good tight fit. it still works well and has a good tension even though it is split.92% was just right to hold the bit in without it falling out.