This is a pocket Battleship game designed to fit inside an Altoids tin. I've also made a pocket Connect Four game: https://www.thingiverse.com/thing:2775568
WARNING: I'm still busy developing this design and I still need to get every dimension right, it's quite hard to get all the pegs to fit nicely.
Here's a list of all the things you need and how many of them:
- Bottom field: x2
- Top field: x2
- Pegs: as many as you can print (two colors)
- Boat with 2, 3, 4 & 5 pegs: doesn't matter, there should be the same amount for each player
- Altoids tin: 2x (normal size)
I recommend printing a few pegs and 1 or 2 boats first to see if your printer can handle it and if the pegs fit well. That way you can dial in your printer.
I recommend printing very slowly (especially the boats & pegs) and with a low layerheight. Once I've got everything right, I will update the thing.
Once somebody has printed it I will post a picture of how it should look. If you know the game it should be pretty straightforward and if you don't, here's a link: https://www.thespruce.com/the-basic-rules-of-battleship-411069
If you printed this, please post a pic in the "Made" section and let me know if I should change anything. Have fun!