Loading
KuRiXY

Anycubic i3 Mega Fan Duct v6 with Split

by KuRiXY Jan 25, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

The file has an issue with a missing layer so the print breaks off...

What do you say about designing/mixing this one https://www.thingiverse.com/thing:1954001? I've tried to do it in Meshmixer, but I wasn't satisfied with the looks of it, so I didn't even bother to print it :/ I've used shroud from mileshkin, but that shroud kills airflow and doesn't distribute it very well. It produced worse results on the overhangs test when compared to the stock shroud :(

You can see a comparison of different (popular for Anets) fan shrouds: https://www.youtube.com/watch?v=vedP3jhMpy4

Semi-Circular Anet A8 Fan Duct
by lokster

It's not an easy job, although it can be done. But I don't have much time now :(

The one that I have posted is the one I am actually using with very very good results, much better than the stock one and others I have tried :)

P.D: If you have problems because one full circle is too much, you can cut the half of this model and close it, it should be an easy job.

Is this for the newest fan duct (Mega04 with 32-bit board) ? Because my angle is flat of the fan duct top

I am sorry not, this is for the first ultrabase version. But if you send me measures or pictures of the new one maybe I can build something similar :)

I have the ultrabase version, and this fan duct is way too high for that. A picture of your setup would be nice. For me, this blows air directly at the heating block...

This must be used with the original or cloned e3d v6 (hence the name), which is shorter than original v5 hotend.

Damn, somehow I thought that was just a version number. :D Sorry for the misunderstanding!

Hy I got the gen 2 What do u need to know for building a new fan. best regards